When it comes to increasing energy efficiency in your home, it’s easy to forget the impact your windows have on your energy usage. Drafty windows are easy to recognize, but you don’t need to have a noticeable issue with your windows to benefit from replacement windows. The proper windows can help you save energy when it comes to heating and cooling your home.
Thanks to improved technologies, the glass in your windows can boost energy efficiency. And that doesn’t just mean tinting your windows. Multiple-pane choices, various kinds of glazing, gas fills, and even the method used to install the glass can help you save money on your energy bills throughout the year, regardless of the weather.
Get to Know the ENERGY STAR® Basics
When considering windows for energy efficiency, it's important to first investigate their energy-performance ratings in relation to the Lewes climate and your home's design. What does “energy efficiency” even mean and how can you weigh the energy savings of one window against another once they’re placed in your home?
ENERGY STAR is a government-backed designation that provides consumers with a dependable source for energy efficiency information about products. When shopping for an energy-efficient window, look for the ENERGY STAR label. It will highlight a number of the factors that go into identifying performance. Here’s a list of what these categories mean:
- U-Factor: The rate of heat loss to the outside. A low U-factor is better.
- Solar Heat Gain Coefficient (SHGC): Normally shown as a fraction, this is the amount of solar radiation that a window lets in. SHGC is measured on a scale from 0 to 1. Window SHGC typically ranges from 0.25 to 0.80. Again, a low number is better.
- Air Leakage (AL): The rate at which air passes through the joints in the window. The lower the AL value, the less air leakage.
- Visible Transmittance (VT): The amount of light the window lets through measured on a scale of 0 to 1, with values generally ranging from 0.20 to 0.80. The higher the VT, the more light you see.
- Condensation Resistance Factor (CRF): How well the window resists water buildup on a scale from 0 to 100. The higher the CRF, the better the window will withstand condensation.
Make sure to seek scores based on whole-unit numbers as opposed to center-of-glass numbers (COG). Whole-unit numbers are more dependable indicators of the window’s overall performance, while COG numbers may not be as consistently reliable in areas of the window farther away from the center.
More Panes, Less Pain
Energy efficiency is improved in windows with more panes of glass in them. Double-pane windows are a notable choice for homeowners looking to improve energy efficiency with replacement windows.
While they can cost more, triple-pane windows can offer even better energy efficiency that is worth the investment. Adding a middle pane means greater protection against the elements and allows the inner pane of the window to stay truer to room temperature. A third pane also impacts any convection currents and drafts that could make a room chillier.
Beyond improving energy efficiency, triple-pane windows also provide greater protection against sound and break-in damage than double-pane replacement windows. So, if you have rambunctious neighbors or live on a busy street, you might benefit from triple-pane windows.
More Than Just Tinting
The glazing on your window can make a big difference in reducing both the SHGC and VT that factors into ENERGY STAR ratings. For years, people have applied tinted glazing to block sunlight and reduce glare. Two other features can help on both sides of the glass and increase energy efficiency in your home.
On windows with two or more panes of glass, insulated glazing is created when the glass panes are spaced apart and hermetically sealed, leaving an insulating air space. Insulated window glazing predominantly lowers the U-factor, but it also improves the SHGC.
Low-e coating can also have an effect on energy efficiency. A microscopically thin, nearly invisible metal or metallic oxide layer added directly on the surface of one or more of the panes of glass, low-e coating helps lower the window’s U-factor and can reduce energy loss by as much as 30 to 50 percent.
Insulating with Gas
Increasingly common these days, gas-filled windows are made of at least two panes of glass with either argon or krypton gas filling the space between them. This gas creates another invisible barrier against the heat and cold that would effect a window’s U-factor or leakage rate.
Argon and krypton are nontoxic, naturally occurring gasses found in the air we breathe. Factory sealing the gas between the window’s glazing layers reduces the possibility of leakage or condensation buildup on the interior and exterior of your windows.
Edge Spacers Seal Out Leaks
The final factor that helps improve the window’s energy efficiency is the edge spacer. Edge spacers serve a number of functions. They:
- hold against the stress the window faces with expansion and contraction during times of heat and cold.
- serve as a moisture barrier to prevent water or vapor condensation.
- provide a gas-tight barrier that prevents the loss of any gas in low-e windows.
Windows are available in single-seal or double-seal systems. Aluminum seals are most common thanks to the material’s strong energy-conducting traits.
Single-seal systems use an organic sealant applied behind the spacers that holds the unit together and prevents moisture leakage. A double-seal system features a secondary backing sealant, often silicon, to further defend against leaks. Double-seal systems are most often used in low-e windows to stop any of the sealed gasses from escaping.
There’s a lot of science that goes into creating an energy-efficient replacement window. But, by understanding the basics of what goes into the ENERGY STAR rating and understanding the differences in window glass options, you can discover windows that will make your home comfortable and save you money at the same time.
Learn more about energy efficiency in your windows by chatting with our team at Pella of Lewes. Call 757-294-8091 or stop by our showroom. You can also schedule an appointment online for a free, in-home consultation.